Aquapure | 300 GPD RO System

Description

5 STAGE 300 GPD COMMERCIAL REVERSE OSMOSIS DRINKING WATER FILTER SYSTEM

Commercial 5 Stage 400 GPD R.O. System

• 1st : 5 Micron 20″ x 2.5″ PP sediment filter
• 2nd : 20″ x 2.5″ 20″ GAC carbon filter
• 3rd : 5 Micron 20″ x 2.5″ CTO coconut shell carbon block filter
• 4th : 3 membranes x 100 GPD Membrane
• 5th : 2.5 x 10″ GAC Inline carbon filter

Including the following Accessories:

• Double ends Booster pump, Upgraded faucet, 3/8″ PE Tube 16 feet, High-Pressure Switch, Low-pressure switch, Solenoid Valve, Feed Water Adapter & valve & wrench.
• All filters and Membranes are included

Specifications:

• The minimum rejection rate of 95% of TDS
• Dimensions: 18″L x 10″D x 30″H RO Unit.
• Total Weight: Approx 68 lbs
• Operation Temperature: 40F to 104F / Maximum temperature 40C.
• Operating Pressure: 10 PSI to 75 PSI.
• The system only to be used on biologically safe water supply.
• Filter cartridges should be changed every 6- 8 months.
• This is the whole system, including extensive installation instructions including pictures, etc.

1st Stage

• 5 Micron Sediment Filter 2.5″ x 20″ – Removes remove larger particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles, dirt, and cloudiness from water.
• Replacement each 4-6 months

2nd Stage

• Pre-Carbon filtration removes Chlorine, Pesticides, Herbicides, bad taste & odor
• GAC T33 Coconut Shell Carbon Filter 2.5″ x 20″ Gives your water sweet taste.
• Replacement each 4-6 months

3rd Stage

• CTO Coconut Shell Carbon Filter 2.5″ x 20″ , Removes Chlorine taste, bad taste & odor.
• Replacement each 4-6 months

4thStage

• 3 x 100 GPD Membranes, Removes particles down to 1/10,000 of a micron ( which is 98% of impurities including organic and inorganic, chemicals). Replacement each 2 years

5th Stage

• Inline Carbon – Polishing GAC Post filter for a sweeter taste for the water and removes any taste or odor the water may have picked up while sitting in the tank.
• Approx Replacement each 2500 Gallon